| |
|
|
Day 1 - 29 Sept. 2016
|
|
|
|
Session I
|
|
|
| Richter, Klaus |
|
Cascade use of wood –illusion or silver bullet for sustainability ? |
| Rozanska A., Policinska-Serwa A |
|
Antique wooden floor reuse possibilities in view of their usage properties preservation |
|
Rademacher P., Rousek R., Krüger M., Baar J., Čermák P., Melcher E., Koch G., Németh R., Pařil P., Paschová Z., Paul D., Potsch T., Vavřík D., Kumpová I., Hofmann T., Sipos G., Bak M. & Hapla F.
|
|
Native oak wood properties – limitations in wood utilization and possibilities of quality improvement |
|
Markström E., Bystedt A., Fredriksson M. & Sandberg D.
|
|
Perceptions of Swedish architects and contractors for the use of bio-based building materials |
| |
|
|
| Session II |
|
|
| Marra M. & Guercini S. |
|
Life cycle assessment of wood wool cement board using recycled wood |
| Paajanen O., Turunen H. & Peura J. |
|
Preparing the life cycle assessment of wax modified wood products |
| Sandak A. & Sandak J. |
|
End-of-life transformation strategies for bio-based building materials |
| Tellnes L.G.F |
|
Potentials and barriers to increased wood products recycling in Norway |
| Dolezal F. & Boogman P. |
|
Current state of the discussion between PEF and EPD as the preferable life cycle assessment scheme for wooden construction products |
| |
|
|
| Session III |
|
|
|
Fodor F., Ábrahám J., Horváth N., Bak M., Csupor K., Komán S., Báder M., Lankveld C. & Németh R
|
|
Modification methods of hornbeam (Carpinus betulus L.) wood in order to achieve high-quality products |
| Paoloni F., Ferrante T. & Villani T. |
|
Wood pre-treatments: A short review |
| Ferreira J., Herrera R., Esteves B. & Domingos L. |
|
Thermally modified Pine boards - an environmental comparison of Portuguese and Spanish case studies |
| Janiszewska D., Sandak A., Sandak J. & Fellin M. |
|
Wood liquefaction – An alternative way for end of life transformation of wood waste |
| Archilla-Santos H.F., Ansell M.P. & Walker P. |
|
Elastic properties of thermos-hydro-mechanically modified bamboo (Guadua angustifolia Kunth) measured in tension |
| Rousek R. & Horáček P. |
|
Influence of steaming at lower temperatures on permanent fixation of compressive deformation of densified wood |
| |
|
|
| Session IV |
|
|
| Straže A. |
|
Hardness of thermally modified ash determined by static- and acousto-dynamic method |
|
Elaieb M.T., Silveira A.E., Khouaja A., Chaar H., Mlaouhi A. & Pétrissans M.
|
|
Study of thermal parameters from eucalyptus wood after heat treatment |
| Patricia Dos Santos S.B., Silvia Da Silva H.F, Gatto D.A. & Labidi J. |
|
Colour changes of wood by two methods of aging |
|
Demirel G.K., Temiz A., Demirel S., Jebrane M., Terziev N., Gezer E.D. & Ertas M.
|
|
Dimensional stability and mechanical properties of epoxidized vegetable oils as wood preservatives |
| Németh R. & Bak M. |
|
Long-term in service evaluation of strip parquet with modified wood face layers |
| |
|
|
Day 2 - 30 Sept. 2016
|
|
|
| FP1407 training school and STSM session |
|
|
| Räty T. |
|
Introducing LCA to wood material practitioners – Feedback from the FP1407 Training school 2016 |
| Peñaloza D. & Kutnar A. |
|
Life cycle assessment of wooden windows with wax-treated frames |
| Neyses B., Rautkari L., Yamamoto A. & Sandberg D. |
|
Reduction of the set-recovery of surface-densified Scots pine by pre-treatment with sodium silicate or sodium hydroxide |
|
Schwarzkopf M.J., Treu A., Tverezovskiy V., Williamson C., Burnard M. & Kutnar A.
|
|
Chemically modified lampante oil as a wood preservation treatment |
| Griebeler C.G. De O., Tondi G., Schnabel T. & Iglesias C. |
|
Effects of natural weathering on surface colour and cracking of thermally modified eucalyptus wood |
| Bekhta P., Krystofiak T., Lis B. & Proszyk S. |
|
Evaluation of surface quality and adherence of thermally compressed and finished wood veneers |
| Kuzman M.K. & Sandberg D. |
|
State of the art and future trends in timber-house technologies in Slovenia and Sweden |
| |
|
|
| Poster Session |
|
|
| Žlahtič M. & Humar M. |
|
Surface properties of thermally wood after artificial and natural weathering |
| Akbas S., Temiz A. & Alma M.H. |
|
Wood plastic composites made of recycled and remediated creosote treated wood - aspects on screw withdrawal properties |
| Aoues Y., Riahi H., Hamdi S.E., Moutou Pitti R. & Bastida E. |
|
Optimal and reliable design of timber beams for a maximum breaking load considering thermal and hydrological effects |
| Silvia Da Silva H.F., Patricia Dos Santos S.B., Gatto D.A. & Labidi J. |
|
Liquefaction of craft lignin using different solvents |
| Gurau L., Campean M. & Ispas M. |
|
The influence of the heat treatment duration on the surface roughness of beech processed by planing |
| Hamada J., Bo-Jhih Lin, Pétrissans A., Wei-Hsin Chen, Gérardin P. & Pétrissans M. |
|
Effect of silver fir forest management on radial density distribution, thermal behaviour and final quality of the heat treated wood |
| Herrera R., Gordobil O., Llano-Ponte R. & Labidi J. |
|
Esterified lignin as hydrophobic agent for use on wood products |
| Odounga B., Moutou Pitti R., Toussaint E. & Grédiac M. |
|
Mode I fracture of tropical species using the grid method in constant environments: experimental results |
| Salan T. & Hakki Alma M. |
|
A preliminary study on the delignification of the wood blocks via microwave assisted atmospheric organosolv method for the production of hemicellulosic scaffolds |
| Salca E.A. & Hiziroglu S |
|
Evaluation of hardness of heat treated yellow poplar wood |
| Schnabel T., Haas R., Huber H. & Petutschnigg A. |
|
Surface modification using infrared radiation |
| Silveira E.A., Pétrissans A., Caldeira-Pires A., Rousset P. & Pétrissans M. |
|
Wood thermal degradation: Prediction of process parameters, solid mass yield, by two mathematical models |
| Svrzić S. & Mandić M. |
|
Abrasive water jet cutting (AJWC): Wood material – Jet interaction. |
| Alma M.H. & Salan T. |
|
Phenolation of wood and its applications for the production of engineered polymeric materials |
| Turunen H., Paajanen O. & Peura J. |
|
Development of wood modification – High melting point wax and hot oil treatments |
| Burawska I. & Zbiec M. |
|
Enhancement of low grade timber with synthetic materials |
| |
|
|
| Session V |
|
|
| Beesley L., Norton G. & Mollon L. |
|
Mobility and toxicity of heavy metal(loid)s arising from contaminated wood ash application to soils |
| Fellin M., Negri M., Felicetti M. & Monsorno V. |
|
Maintaining wood naturalness: production of biocompatible wooden floors and monitoring of heavy metals, voc, and radiation |
| Robles E., Herrera ., Gordobil O. & Labidi J. |
|
Bio-cascading of heat treated wood after service life to obtain lignocellulosic derivatives |
| Berg A. |
|
A novel wood impregnating agent |
| Escamilla E.Z., Habert G. & Wohlmuth E. |
|
CO2 the untapped resource. Life cycle assessment of glue-laminated wood solutions for housing in the Philippines |